Connect KwêHub to WiFi using Smart Connect

Connect to WiFi using Smart Connect

  1. Install the APP as described in section Install the Mobile App.
  2. On your KwêHub, press and hold both buttons simultaneously for 2 seconds.

  3. The Hub will sound 3 beeps and the connection light will turn white.
  4. Quick press both buttons again.

  5. The Hub will sound 3 short beeps and the connection light will flash White.
  6. Navigate to “Add Hub” on the mobile App and press “Connect Hub to WiFi”.
  7. Click on Smart Connect Method.
  8. Enter the SSID and Password and click on Send to Hub.
  9. Wait for the connection Light to turn Purple or Dark blue.
  10. If the light is still solid white, click on Stop and Send to Hub again.
  11. If you tried this a few times and it is not working, please try one of the other methods.
Info
  1. If the connection light flashes red:
    1. 2 Flashes - Can't find SSID.
    2. 4 Flashes - Wrong password.
  2. Your location and WiFi must be enabled for this to work.